Bürkert
INSERTION 流量测量设备或带叶轮和流量变送器的计量设备或分离式计量设备
类型 8025 / 商品编号 419520
商品描述
流量测量设备或 8025 型计量设备，尤其适用于中性和弱腐蚀性、不含固体物质的液体。 8025 型流量测量设备提供多种不同的规格。• 带叶轮传感器的紧凑型流量测量设备提供两种规格：标准信号输出端或通过电池供电，带有显示器和不带输出端。• 分离式变送器提供两种规格：- 用于开关柜或壁挂安装方式的通用变送器，可与其他流量传感器联动；带集电极开路输出端、舌簧继电器输出端、TTL、CMOS 或线圈的传感器可以与该变送器配套工作。- 用于开关柜或壁挂安装方式的变送器：用于与 Bürkert 8020/8030/SE30+S077 型“Low Power”规格的流量测量设备组合使用的标准信号输入端。 8025 型计量设备也提供多种不同的规格：• 带叶轮传感器的紧凑型计量设备 • 用于开关柜和壁挂安装的分离式计量设备，可与 Bürkert 8020/8030/8031/8041/SE30+S077 型流量测量设备或者其他流量传感器联动；带有集电极开路输出端、舌簧继电器输出端、TTL、CMOS 或者线圈的传感器可与该计量设备配套工作。
- 商品编码
- 90261021
- 国家
- FR
技术属性
名称 |
金额 |
单位 |
|---|---|---|
| Type | 8025 | |
| Product sub-group | Flow rate | |
| Flow rate (volume) | No | |
| Concentration | No | |
| Continuous measurement | Yes | |
| Dosing | Yes | |
| Switch | No | |
| Construction device | Compact | |
| Display type | Display | |
| Protection class measurement device (IP) | 65 | |
| DC voltage min. | 12 | V |
| DC voltage max. | 36 | V |
| Battery voltage | No | |
| Precision of volume flow rate in relation to reading | 1 | % |
| Temperature environment min | -10 | °C |
| Temperature environment max | 60 | °C |
| Temperature medium min | -15 | °C |
| Temperature medium max | 80 | °C |
| Pressure Class (PN) | PN 10 | |
| Dynamic viscosity min. | 0 | cP |
| Dynamic viscosity max. | 300 | cP |
| Detection of flow direction | No | |
| Transmitter type | Basic | |
| Sensor type | Paddle wheel | |
| Paddle wheel type | Magnetic | |
| Paddle wheel measuring principle detection | Hall | |
| Fitting electronic interface | Insertion 2 (inch) | |
| Electrical connection 1 type | Cable gland M20 | |
| Electrical connection 1 quantity | 2 | PCE |
| Electrical connection 1 gender | Terminal block | |
| Electrical connection 1 material category | Plastics | |
| Electrical connection 1 material | PA (Polyamide) | |
| Electrical connection 1 seal material | Neoprene | |
| Input type digital quantity | 4 | PCE |
| Output 1 digital type | Transistor | |
| Output 1 digital transistor connection NPN | Yes | |
| Output 1 digital transistor connection PNP | Yes | |
| Digital output 1 transistor contactless | 0.1 | A |
| Output 2 digital type | Relay | |
| Output 2 digital version NC | No | |
| Output 2 digital version NO | Yes | |
| Output 2 digital relay/reed voltage AC | 230 | V |
| Output 2 digital relay/reed voltage DC | 40 | V |
| Output 2 digital relay/reed power AC | 3 | A |
| Output 2 digital relay/reed power DC | 3 | A |
| Output 3 digital type | Relay | |
| Output 3 digital version NC | No | |
| Output 3 digital version NO | Yes | |
| Output 3 digital relay/reed voltage AC | 230 | V |
| Output 3 digital relay/reed voltage DC | 40 | V |
| Output 3 digital relay/reed power AC | 3 | A |
| Output 3 digital relay/reed power DC | 3 | A |
| Output 4 digital type | Transistor | |
| Output 4 digital transistor connection NPN | Yes | |
| Output 4 digital transistor connection PNP | Yes | |
| Output 4 digital transistor current | 0.1 | A |
| Electronics body material category | Plastics | |
| Electronics body material | PC (Polycarbonate) | |
| Cover material | PC (Polycarbonate) | |
| Protection lid material | PC (Polycarbonate) | |
| Nut material | PC (Polycarbonate) | |
| Front foil material category | Plastics | |
| Front foil material | Polyester | |
| Seal sensor/housing material | FKM (Fluor rubber) | |
| Seal housing/cover material | NBR | |
| Protection lid seal material | Silicone | |
| Screw material | Stainless steel | |
| Fastening part material | PSU (Polysulfone) / PPSU (Polyphenylsulfone) | |
| Parametrisation local | Yes | |
| Parametrisation separate | No | |
| Parametrisation fixed | No | |
| Finger material composition | Plastics | |
| Finger material | PVDF (Polyvinylidene fluoride) | |
| Medium-contacting parts seal material | FKM (Fluor rubber) | |
| Paddle wheel material | PVDF (Polyvinylidene fluoride) | |
| Paddle wheel axle material | Ceramic | |
| Bearing material category | Technical ceramics | |
| Bearing material | Ceramic | |
| Insertion sensor length | short | |
| Tropical climate version | Yes | |
| Time dosing | No | |
| Batch dosing | Yes | |
| Extended diagnosis | No | |
| Volumeter | Yes | |
| 重量 | 0,880000 | kg |
下载
数据表
产品描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
Type 8025 data sheet | digital batch controller | 1.5 MB | EN / EU |
|
|
Type 8025 data sheet | digital flowmeter for continuous flow measurement | 1.8 MB | EN / EU |
|
|
Type 8025 data sheet | digital flowmeter for continuous flow measurement [US units] | 973.3 kB | EN / US |
|
|
Type 8025 data sheet | single or multi batch controller system | 100.5 kB | EN / GB |
|
|
Type S020 data sheet | Insertion fitting for flow or analytical measurement | 2 MB | EN / EU |
|
|
Tipo 8025 folha de dados | aparelho de medição do fluxo comroda de pás Insertion/doseador | 766.8 kB | PT / BR |
|
|
Tipo 8025 hoja de datos | caudalímetro de rueda de aletas/dosificador Insertion | 1.7 MB | ES / ES |
|
|
Tipo 8025 hoja de datos | transmisor digital para medición dcaudal en continuo | 872.1 kB | ES / ES |
|
|
Tipo S020 hoja de datos |racor para pH ELEMENT ymedidores de conductividad | 923.1 kB | ES / ES |
|
|
Typ 8025 Datenblatt | digitales Dosiergerät | 1.5 MB | DE / DE |
|
|
Typ 8025 Datenblatt | digitales Durchflussmessgerät | 1.8 MB | DE / DE |
|
|
Typ S020 Datenblatt | Insertion-Fitting für Durchfluss-/Analysemessungen | 2 MB | DE / DE |
|
|
Type 8025 fiche technique | Contrôleur de dosage Insertion numérique | 1.5 MB | FR / FR |
|
|
Type 8025 fiche technique | Débitmètre Insertion numérique | 394.5 kB | FR / FR |
|
|
Type S020 fiche technique |Raccord Insertion pour les mesures de débit ou d'analyse | 1.9 MB | FR / FR |
用户手册
产品描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
|
Operat. Instr. Type 8025 8035 SE35 | Insertion/Inline flowmeter/Flow transm.,w. batteries | 471.8 kB | EN / EU |
|
|
Operating Instructions Type 8025 8035 SE35 BATCH | Batch controller | 1.8 MB | EN / EU |
|
|
Operating Instructions Type 8025 8035 SE35 | Insertion or Inline flowmeter / transmitter | 2.1 MB | EN / EU |
|
|
Operating Instructions Type 8025 UNIVERSAL | Flow transmitter | 888.1 kB | EN / EU |
|
|
Operating Instructions Type S020 | Insertion fitting | 1.6 MB | EN,FR,DE / EU |
|
|
Quickstart Type 8025 8035 SE35 BATCH | Batch controller | 975.2 kB | EN / EU |
|
|
Quickstart Type 8025 | Insertion flowmeter with paddle-wheel | 1.5 MB | EN / EU |
|
|
Quickstart type 8025 UNIVERSAL | Insertion flowmeter or batch controller | 725.6 kB | EN / EU |
|
|
Bedienung Typ 8025 8035 SE35 | Insertion- oder Inline-Durchflussmesser / -transmitter | 2.1 MB | DE / EU |
|
|
Bedienungsanleitung Typ 8025 8035 SE35 BATCH | Dosiergerät | 1.6 MB | DE / EU |
|
|
Bedienungsanleitung Typ 8025 8035 SE35 | Durchfluss-Messer/Transmitter mit Batterien | 572.4 kB | DE / EU |
|
|
Bedienungsanleitung Typ 8025 UNIVERSAL | Durchflusstransmitter | 944.6 kB | DE / EU |
|
|
Manual de usuario Tipo 8025 | Caudalímetro de rueda de aletas/dosificador Insertion | 706.7 kB | ES / ES |
|
|
Manual de usuario Tipo 8025 | Caudalímetro de rueda de aletas/dosificador Insertion | 1 MB | ES / ES |
|
|
Manuel d'utilisation Type 8025 8035 SE35 BATCH | Contrôleurde dosage | 1.8 MB | FR / EU |
|
|
Manuel d'utilisation Type 8025 8035 SE35 | Débitmètre Insertion ou Inline/Transm. de débit | 2.1 MB | FR / EU |
|
|
Manuel d'utilisation Type 8025 UNIVERSAL | Transmetteur de débit | 908.8 kB | FR / EU |
|
|
Manuel d'utilisation type 8025 8035 SE35 | Débitmètre/Transmetteur de débit à piles | 539.7 kB | FR / EU |
|
|
Quickstart Typ 8025 8035 SE35 BATCH | Dosiergerät | 1 MB | DE / EU |
|
|
Quickstart Typ 8025 UNIVERSAL | Durchfluss-Transmitter | 759.9 kB | DE / EU |
|
|
Quickstart Typ 8025 | Insertion-Durchflussmesser mit Flügelrad | 1.5 MB | DE / EU |
|
|
Quickstart Type 8025 8035 SE35 BATCH | Contrôleur de dosage | 993.9 kB | FR / EU |
|
|
Quickstart Type 8025 | Débitmètre à Insertion à ailette | 1.4 MB | FR / EU |
|
|
Quickstart type 8025 UNIVERSAL | Transmetteur de débit | 754.1 kB | FR / EU |
欧盟声明
产品描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 492.2 kB | ML |