Bürkert
伺服辅助式两位两通隔膜电磁阀
类型 0142 / 商品编号 42126
商品描述
0142为伺服式隔膜电磁阀。要完全打开或关闭阀门，需要一个最小压差。根据不同的应用，可以选择各种膜片材质和工作方式。阀体材质为PVC 或 PVDF。 其两位三通先导阀的常开和常闭功能可方便地进行转换：只需将其在主阀座上进行旋转即可。先导阀位置反馈可以采用开关或 NAMUR 信号。电磁线圈采用耐化学腐蚀的环氧树脂封装。0142 型配备了手动开关，可用于调试和测试。如有节能要求，所有线圈都可提供节电式。与 DIN EN 17301-803 A 型电缆插头配套，该阀的安全防护等级为 IP65 和 NEMA 4X。
- 商品编码
- 84818079
- 国家
- DE
技术属性
名称 |
金额 |
单位 |
|---|---|---|
| Type | 0142 | |
| Operation | servo-controlled | |
| Actuator type | Pivot | |
| Main valve operating principle | Diaphragm valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Valve function manual actuation screw slot | No | |
| Flow | Above seat | |
| Nominal pressure min | 0,5 | bar |
| Nominal pressure max (liquid) | 6 | bar |
| Main valve orifice 1 (P) (mm) | 25 | mm |
| Main valve orifice 1 (inch) | 1 inch | |
| Kv value (water) | 14 | m3/h |
| QNn value (gas) | 15.000 | l/min |
| Main valve wetted material | PVC (Polyvinyl chloride) | |
| Port connection 1 type | Bonded sleeve | |
| Port connection 1 size DN | DN 25 | |
| Port connection 1 inner diameter (mm) | 32 | mm |
| Port connection 2 type | Bonded sleeve | |
| Port connection 2 size DN | DN 25 | |
| Port connection 2 inner diameter (mm) | 32 | mm |
| Pilot control material medium-contacting | PVDF (Polyvinylidene fluoride) | |
| Seat seal material category | Elastomer | |
| Seat seal material | EPDM (Ethylene-propylene-diene rubber) | |
| Sealing toward outside material | EPDM (Ethylene-propylene-diene rubber) | |
| Temperature environment max | 40 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 50 | °C |
| Voltage / rated voltage | 230 | V |
| Voltage / rated voltage | 230 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50/60 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 5 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | enclosed | |
| Cable plug art. no. - type | 00161487 - 2508 | |
| Electrical connection position | top | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 100 | ms |
| Switch time open max. | 800 | ms |
| Switch time close min | 1.000 | ms |
| Switch time close max. | 4.000 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control orifice (mm) | 2 | mm |
| Pilot control seal material | EPDM (Ethylene-propylene-diene rubber) | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Valve construction | Valve complete | |
| 重量 | 1,13 | kg |
可与以下产品配套
下载
数据表
描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
Type 0142 data sheet | servo-assisted solenoid valve with diaphragm | 684 kB | EN / EU |
|
|
Typ 0142 Datenblatt | Durchgangsmagnetventil mit Servomembran für aggressive Medien | 696 kB | DE / DE |
用户手册
描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
|
使用说明 ACP016 | 型电磁线圈 | 具有 II 2G/D Ex 认证的设 | v2.0 | 2 MB | ZH / CN |
|
|
Additional manual 0330 | FM Division 1 US/CA V2.0 | 265 kB | EN / US |
|
|
Operating Instructions Type 0142 | 2/2-way solenoid valve | 621 kB | EN / EU |
|
|
Operating Instructions Type 0780 | ATEX approval | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v2.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ 0142 |2/2-Wege-Magnetventil | 622 kB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 2 MB | DE / DE |
|
|
Manual d'utilisation Type ACP016 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 2 MB | FR / FR |
|
|
Manuel d‘utilisation Type 0142| Électrovanne à 2/2 voies | 635 kB | FR / FR |
|
|
Procesní instrukce Typ 0142 |2/2-cestný elektromagnetický ventil | 625 kB | CS / CZ |
欧盟声明
描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 48 kB | EN,FR,DE |
传单及目录
描述 |
文件大小 |
语言 / 国家 |
|
|---|---|---|---|
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |